Editing Introduction to a Self Managed Life: a 13 hour & 28 minute presentation by FUTO software (section)

==== 3.2 Set Up an Endpoint (This is Where Inbound Calls Get Sent To) ====

Endpoints are where your call is sent when a call comes in on a number you have in Unitel. When you create a phone number in Unitel, it will ask where you want to send calls that come into that number. We’re going to set up the endpoint first so when we create a number, we’ll already have an endpoint to send it to.

'''Navigate to the “Endpoints” Section'''

# From the main dashboard, go to '''“Settings”'''.
# Click on '''“Endpoints”'''.
# '''Create a New Endpoint'''
# Click on '''“Add Endpoint”'''.
#* Fill in the following details:
#** '''Endpoint Description''': Enter a name that describes the endpoint (e.g., closet pbx).
#** '''Endpoint Destination''': Insert the dynamic DNS entry (e.g.<code>louishomeserver.chickenkiller.com</code>) that you set up back in the FreeDNS Dynamic DNS section of this guide. This should resolve to your PBX’s external IP address. When a call comes in on a specific number, it is going to send the call to your PBX at this IP.
# Click '''“Add Endpoint”''' to complete the setup.

<gallery mode="packed-hover" heights=250 widths=400 perrow=2>
File:lu67917r1ezu_tmp_8b8d5b23.png
File:lu67917r1ezu_tmp_70f53605.png
File:lu67917r1ezu_tmp_70f56fbb.png
File:lu67917r1ezu_tmp_ae6d3290.png
File:lu67917r1ezu_tmp_16e56098.png
</gallery>

<span id="get-configure-phone-numbers"></span>