Editing Introduction to a Self Managed Life: a 13 hour & 28 minute presentation by FUTO software (section)

==== 7.4. Adjust the Thermostat Using the Home Assistant App ====

# '''Access the Thermostat in the App'''
#* After logging in, you’ll see the Home Assistant dashboard.
#* FInd your Venstar Thermostat (e.g., Second Floor Thermostat) on the dashboard.
# '''Control the Thermostat'''
#* Tap on the thermostat card to open the controls.
#* From here, you can:
#** '''Adjust the Temperature:''' Use the sliders or buttons to set the temperature.
#** '''Set Mode:''' Change the thermostat to Heat, Cool, or Auto.
#** '''Fan Control:''' Choose whether the fan should run Continuously or only when the heat/AC is on.
# '''Monitor Historical Data on when you Had it on'''
#* The app will display historical data showing the target temperature and current room temperature over time, so you can see when it was on, etc.

<blockquote>Historical data will not show how many times you have punched the thermostat’s touchscreen, cursed at Venstar, or threatened the lives of the people who engineered it. But it should.
</blockquote>
<span id="home-surveillance-camera-system-with-alerts"></span>